The RRST-HN4B-WH from Lutron is a 4-Button Sunnata RF Hybrid Keypad for use with the RadioRA 3 system. This hybrid keypad functions as a dimmer and keypad in one device and is ideal for retro-fit applications as it eliminates the need to install two separate devices. Features include large easy-to-use buttons, LED bars on each button for locating the buttons in low light conditions and a Front Accessible Service Switch for safe lamp replacement. The RRST-HN4B comes with default printing and custom printing can be redeemed using the RadioRA 3 setup software. Default printing provides the ability to immediately use the keypad in the space. Once the required custom printing has been identified, a replacement button kit can be redeemed using the RadioRA 3 setup software.
Features:
- At the press of a single button, lights fade ON or OFF to desired levels and shades / draperies open or close to desired position
- Light levels and shade / drapery positions can be fine-tuned by pressing and holding the raise/lower buttons
- Programmable to select scene or room preset level programming
- Adjustable status LED intensity through system level programming
- Internal dimmer is controlled by the keypad buttons to verify proper installation prior to system programming
- Internal dimmer can be assigned to any button on the hybrid keypad and can be programmed to be controlled by any keypad
- Configurable raise / lower selection using programming software
- Last button pressed (default) - devices controlled by the last button pressed will raise / lower
- Programmed devices - only the devices programmed to the button will raise / lower.
- Keypads include one credit redeemable for a single custom printed replacement button kit through the setup software. Terms and conditions apply
- Programmable phase selection to optimize compatiblity with different load types
